Scope Digilink Uhf
Source: Inter Page LP
Each contact is programmable for Pager ID, Alerts Type, Message, Trigger Time, Activation Time, Repeat Time and has an open collector output for a sounder.
The Scope Digilink Uhf is offered in two 12 Volt DC models. The Four Zone and Eight Zone encoder and paging transmitter. Each unit is serially programmable and will transmit in POCSAG format. Each contact is programmable for Pager ID, Alerts Type, Message, Trigger Time, Activation Time, Repeat Time and has an open collector output for a sounder. The units have Tamper and Low battery (if using a battery) alarm contact. Each contact can be set for VOLTAGE or DRY, and can be programmed for NORMALLY OPEN, NORMALLY CLOSED, CHANGE OF STATE or ENTRY/EXIT DELAY.
Entrance and exit delay may be preprogrammed from 1 second to 127 hours. Repeat time is selectable from no repeats to repeat till reset. All repeats will transmit in a random time frame.
Inter Page LP, 618 US Highway One #200, West Palm Bch, FL 33408. Tel: 561-844-7900; Fax: 561-844-5844.